Publikationen


Suche nach „[IPH Teisnach]“ hat 81 Publikationen gefunden
Suchergebnis als PDF
    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Vortrag

    Gerald Fütterer, A. Sperl, Simon Killinger, A. Engelbrecht, M. Werni, W. Krais

    Developing a four-tilted-mirror telescope as a student project

    SPIE Optics Education and Outreach V, San Diego, CA, USA

    2018

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Vortrag

    Gerald Fütterer, A. Sperl, A. Engelbrecht, Simon Killinger, M. Werni, W. Krais

    Abschattungsfreies Multi-Schiefspiegel-Teleskop als studentisches Entwicklungsprojekt

    119. Jahrestagung der Deutschen Gesellschaft für angewandte Optik (DGaO), Aalen

    2018

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Vortrag

    Gerald Fütterer

    Optimization of the complex coherence function for diffraction-based wavefront transformations

    SPIE Photonics Europe 2018, Strasbourg, Frankreich

    2018

    DigitalNachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Vortrag

    Alexander Haberl, H. Harsch, Gerald Fütterer, Johannes Liebl, C. Pruß, Rolf Rascher, W. Osten

    Model based error separation of power spectral density artefacts in wavefront measurement

    SPIE Optical Engineering + Applications Conference on Interferometry XIX, San Diego, CA, USA

    2018

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Vortrag

    Christian J. Trum, Sebastian Sitzberger, Rolf Rascher

    Improved performance of CMP processes through targeted adjustment of polishing slurry and polish pad

    SPIE Optical Engineering + Applications 2018, San Diego, CA, USA

    2018

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Vortrag

    Christian J. Trum

    The critical success factor slurry in the polishing process

    Workshop "Glas?Klar! Clear as Glass"

    92. Glastechnische Tagung 2018 der HVG-DGG, Bayreuth

    2018

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Zeitschriftenartikel

    Christian J. Trum, Rolf Rascher, M. Zäh

    Effizientes chemisch-mechanisches Polieren (CMP)

    Werkstattstechnik online-wt-online, no. 3, pp. 174-179

    2018

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    Christian J. Trum, Sebastian Sitzberger, Rolf Rascher

    Improved performance of CMP processes through targeted adjustment of polishing slurry and polish pad

    Proceedings of SPIE Optical Engineering + Applications (19-23 August, 2018; Optical Manufacturing and Testing XII; San Diego, CA, USA), San Diego, United States, vol. 10742

    2018

    ISBN: 978-1-5106-2055-1

    DOI: 10.1117/12.2321031

    Abstract anzeigen

    Chemical-mechanical polishing (CMP) of optical glasses is widespread and forms the basis for many high-precision polishing processes. The pads, slurries and glass materials used in polishing have many different properties. The effects of these properties on the process results are often unknown. The right choice and combination is therefore often a challenge. By means of a plan processing of N-BK7 and SF56 samples by a plan-polishing process, the influence on the process results, material removal rate (MRR), micro roughness and cleanliness caused by slurry and polishing pad is shown. It turns out that the type of polish pad has the biggest impact on the results. The easy-to-process material N-BK7 shows only little influence by the type of slurry used. The more challenging SF56, however, shows significant effects, especially in the area of the resulting micro roughness and the appearance of surface damages like orange peel. Especially the use of Auerpol® PZ500 shows clear advantages here. For a selection of three out of nine polishing pads, the effect of density variation of the slurry was also investigated. Lower particle concentrations lead to lower material removal rates. This applies to both materials. The more sensitive SF56 shows a reduction in micro roughness by the use of a less dense slurry. The correct selection of the polishing pad has a positive effect on the material removal rate and/or the micro roughness in all tested materials. An adaptation of the type and concentration of the slurry is especially important for more sensitive materials and in combination with the right polishing pad. In view of the development towards special materials and small lot sizes, the targeted and correct selection of polishing slurries and pads becomes more and more important. The information required for this purpose on the behavior of the pads and slurries available on the market must therefore first be determined in a targeted manner and clearly presented.

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    Gerald Fütterer, A. Sperl, A. Engelbrecht, Simon Killinger, M. Werni, W. Krais

    Abschattungsfreies Multi-Schiefspiegel-Teleskop als studentisches Entwicklungsprojekt

    DGaO Proceedings zur 119. Jahrestagung in Aalen (22.-26.05.2018) 2018

    2018

    Abstract anzeigen

    An der Fakultät für Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen der Technische Hochschule Deggendorf wird ein breites Wissensspektrum vermittelt. Um dieses praxisnah zu gestalten, wurde ein Teleskopbau-Projekt ins Leben gerufen. Mit dem Technologie-Campus Teisnach existiert die Basis für die Fertigung und Messung hoch präziser Teleskop-Optiken. Ausgangsparameter sind 400 mm Durchmesser des Primärspiegels und der Ansatz, am Markt bestehende Systeme in der optischen Abbildungsleistung einzuholen. Das optische Design beruht auf einer Untermenge des Parameterraums, der 1989 von M. Brunn veröffentlicht wurde. Das Konzept wurde später von D. Stevick als F12 System (mit Bezug auf die Arbeit von M. Paul, 1935) gebaut. Das THD-Projekt startete mit einem Vergleich von F7 Systemen, die in Zemax implementiert wurden. Die Abbildungsleistung wurde über ein Feld von 0,7 ° deg verglichen. Das mechanische Design schließt FEM Simulation thermischer Effekte an leichtgewichteten Spiegeln ein. Unterschiedliche Tuben wurden miteinander verglichen, einschließlich CFK Monocoquetubus. Ein weiterer Punkt ist die Auslegung der Nachführung. Es wird der Stand der Entwicklung dargelegt.

    DigitalNachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Vortrag

    Gerald Fütterer

    CSLM illumination for 1D and 2D encoded holographic 3D displays

    Illumination Optics V, Symposium: EOD18 SPIE Optical Systems Design, Frankfurt am Main

    2018

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    Gerald Fütterer, A. Sperl, Simon Killinger, A. Engelbrecht, M. Werni, W. Krais

    Developing a four-tilted-mirror telescope as a student project

    Optics Education and Outreach V, vol. volume 10741

    2018

    ISBN: 9781510620537

    DOI: 10.1117/12.2320542

    Abstract anzeigen

    The Faculty of Applied Natural Sciences and Industrial engineering, which is a part of the Deggendorf Institute of Technology (DIT), transfers a broad spectrum of knowledge to the students. Edifying the interrelations, which are present between seemingly isolated fields of knowledge, is a permanent process. In order to make this practical, a telescope construction project was launched. The Technology Campus Teisnach bundles capacities for process development, production and measurement of highprecision optics. This also includes telescope optics. This qualifies the Campus for being the base of the in-house project. Fixed boundary conditions are e.g. 400 mm diameter of the primary mirror M1 and the objective to realize an image performance, which is equivalent to commercial telescopes. Furthermore, an unobscured tilted-mirror-system should be realized. The optical design, which was chosen as a result of an analysis of the state of the art, is based on a subset of the parameter space, which was published in 1989 by M. Brunn 1, 2. The concept was later built by D. Stevick as f/12-system (with reference to the work of M. Paul, 1935) 3. The DIT project started with a comparison of f/7-systems. They had been implemented in the optical design software Zemax. The imaging performance was compared within a field of view of 0.7 ° deg. The mechanical design includes FEM simulation of thermal effects on slightly weighted mirrors. Different tubes had been compared, including carbonfiber- reinforced-polymer (CFRP) Monocoquetubus. Another task is the realization of fast and precise tracking. The state of the development is set out.

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    Gerald Fütterer

    CSLM illumination for 1D and 2D encoded holographic 3D displays

    Illumination Optics V; SPIE Illumination Optics Conference; SPIE Optical Systems Design (OSD) [May 14-16, 2018; Frankfurt, Germany], vol. 10693

    2018

    ISBN: 9781510619234

    DOI: 10.1117/12.2312745

    Abstract anzeigen

    To leave the path of classic holography and limit the space-bandwidth-product of the holographic reconstruction is one way to enable interactive real time holographic 3D displays. Thus, a couple of major problems - among several others - can be reduced to a practical level. This holds e.g. for the computation power, the data transfer rate and the pixel count of the spatial light modulator (SLM) used. Although this idea is almost twenty years old, the maximum time span of IP protection, displays based on space-bandwidth-limited CGH reconstruction, which also can be referred to as spacebandwidth- limited reconstruction of wave front segments, are still not on the market. There are several technological reasons for that. However, the technological barriers can be tackled gradually. One problem to be solved is the illumination of the entrance plane of the preferable complex valued spatial light modulator (CSLM). Here, CSLM means to modulate the phase and the amplitude of each pixel. The display diagonals of desktop and TV type CSLM might be e.g. 32 and 65 inch respectively. In other words, reasonable large collimated illumination wave fields are mandatory. In addition a small form factor is a must have in order to obtain commercial success. The solution is an optical system design, which is based on Bragg diffraction based volume gratings. Classic refractive optics fails here. In other words, Bragg diffraction based volume gratings are key components of illumination units of holographic 3D displays. They can be used within a parameter space, which cannot be addressed by surface relief type diffraction optics. But their layout depends on the parameters of the illumination wave field, which has to be tailored in regards to the optical system of the discrete, e.g. 1D or 2D encoded holographic 3D display. This will be described in more detail. The example used for the description is a double wedge type backlight unit. Furthermore, it will be explained why the use of complex valued secondary light sources is a must have in holographic 3D displays. For this, a short explanation of coherent retinal inter object point cross talk will be given too. Finally, the description of the wave field shaping (WFS), which is required in order to form the optimized complex valued light source planes, is provided. In other words, a description of a tailored coherence preparation is given, which is up to now not state of the art. The cause and effect relationship of the light propagating from the primary light sources, which are lasers, to the final receptor, which is the retina, will be pointed out. Although this tailored partial coherent illumination totally differs from the state of the art of information displays, it might help to understand a technology, which will come in the next decades.

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    Gerald Fütterer

    Optimization of the complex coherence function for diffraction-based wavefront transformations

    Unconventional Optical Imaging

    2018

    ISBN: 9781510618800

    DOI: 10.1117/12.2307245

    Abstract anzeigen

    Partial coherence is used in a plurality of applications, magnifying microscopic imaging, interferometric measurement, lithographic imaging, CGH based wave front shaping, interference lithography and space-bandwidth-limited wave front reconstruction, just to name a few. In some applications the primary light source is characterized by a limited coherence length and an extended angular spectrum of plane waves, which has to be narrowed, e.g. if an Excimer laser is used. Sometimes the angular spectrum of plane waves of the primary light source has to be increased in order to be practical. There are several possibilities in general, the primary light source can be used directly, the system has to be adapted or the coherence function Γ has to be tailored in order to provide the specific requirements. Almost all embodiments come with little changes of the light sources coherence properties only. For example, to use a spectral bandpass filter or to limit the size of the light source seem to be the standard solution for almost everything. However, more advanced tailoring of the complex valued coherence function Γ leads to an increased image quality, e.g. in interferometers, but is not limited to this, reduces background noise, decouples Fizeau cavities or it enables complete new illumination and imaging system designs, which provide unique features. This aspect will be discussed herein. Furthermore, the propagation of the complex coherence will be taken into account. This is done in order to provide defined conditions in defined planes of imaging devices. In other words, the usage of the Wiener-Khintchin theorem and the van Cittert-Zernike theorem is just a part of the system analysis and system optimization, which has to be done. Although generic approaches are used, discrete light source layouts are strongly related to the discrete optical devices, which make use of them. The specific tailoring of the complex coherence function, which is related to the space-bandwidth-limited reconstruction of wave front segments, which also can be referred to as space-bandwidth-limited CGH reconstruction, will be described in more detail. For this type of real time dynamic imaging two major problems - among several others - have to be solved. One problem is the huge computation power and the other one is the coherent retinal cross talk of adjacent image points, which are reconstructed in the image volume. The disclosed layouts of tailored secondary light sources are based on the Wiener-Khintchin theorem and the van Cittert-Zernike theorem. Both problems, which are mentioned above, can be solved. Tailored complex valued light sources reduce the required computation power by enabling reduced coherent overlay of sub-CGH areas. Furthermore, they reduce the coherent retinal cross talk of dynamic real time spacebandwidth- limited CGH reconstruction, which is used in advanced imaging applications, too. This results in an increased image quality of partial coherent wave field reconstruction based imaging.

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    O. Fähnle, Christian Vogt, Rolf Rascher

    Load controlled process window analysis of feed controlled CNC grinding

    PROCEEDINGS VOLUME 10692 SPIE OPTICAL SYSTEMS DESIGN, 14-17 MAY 2018 Optical Fabrication, Testing, and Metrology VI, Frankfurt, Germany

    2018

    ISBN: 978-1-5106-1921-0

    DOI: 10.1117/12.2315336

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    O. Fähnle, O. Dambon, M. Doetz, F. Klocke, Christian Vogt, Rolf Rascher

    Ductile grinding of tungsten carbide applying standard CNC machines: a process analysis

    Proceedings of SPIE 10692: SPIE Optical Systems Design/Optical Fabrication, Testing, and Metrology VI (14.-17.05.2018; Frankfurt/Main)

    2018

    DOI: 10.1117/12.2315338

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    Christian J. Trum, Christian Vogt, Sebastian Sitzberger, Rolf Rascher, O. Fähnle

    Filled-Up-Microscopy (FUM): a non-destructive method for approximating the depth of sub-surface damage on ground surfaces

    Proceedings of SPIE 10829 (Fifth European Seminar on Precision Optics Manufacturing [April 10-11, 2018; Teisnach])

    2018

    ISBN: 978-1-5106-2270-8

    DOI: 10.1117/12.2318576

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    O. Fähnle, M. Doetz, O. Dambon, F. Klocke, Christian Vogt, Rolf Rascher

    Ductile mode single point diamond turning (SPDT) of binderless tungsten carbide molds

    Proceedings of SPIE Optical Engineering + Applications (19-23 August, 2018; Optical Manufacturing and Testing XII; San Diego, CA, USA), San Diego, United States, vol. 10742

    2018

    ISBN: 978-1-5106-2055-1

    DOI: 10.1117/12.2323244

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    O. Fähnle, Christian Vogt, Rolf Rascher, Marius Doetz, Olaf Dambon, Fritz Klocke

    From turning to grinding: ductile machining with gPVA

    Proceedings of SPIE Optical Engineering + Applications (19-23 August, 2018; Optical Manufacturing and Testing XII; San Diego, CA, USA), San Diego, United States, vol. 10742

    2018

    ISBN: 978-1-5106-2055-1

    DOI: 10.1117/12.2323246

    NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

    Beitrag (Sammelband oder Tagungsband)

    O. Fähnle, Christian Vogt, Rolf Rascher, M. Doetz, O. Dambon, F. Klocke

    Ductile grinding of tungsten carbide molds applying standard CNC machines

    Proceedings of SPIE Optical Engineering + Applications (19-23 August, 2018; Optical Manufacturing and Testing XII; San Diego, CA, USA), San Diego, United States, vol. 10742

    2018

    ISBN: 978-1-5106-2055-1

    DOI: 10.1117/12.2323245