Suche nach „[Werner] [Bogner]“ hat 51 Publikationen gefunden

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Zeitschriftenartikel

Felix Sepaintner, Andreas Scharl, Franz Xaver Röhrl, Werner Bogner, Stefan Zorn

Characterization and Production of PCB Structures With Increased Ratio of Electromagnetic Field in Air

IEEE Transactions on Microwave Theory and Techniques, vol. 68, no. 6, pp. 2134-2143

2020

DOI: 10.1109/TMTT.2020.2983934

Abstract anzeigen

Producing passive printed circuit board (PCB) structures in the millimeter-wave range includes some fundamental challenges, such as low manufacturing costs and high fabrication accuracy. These aspects, in general, have to be combined with low signal attenuation, precise simulation models, and a reliable producibility. This article shows a new method to manufacture different kinds of passive RF waveguides with reduced attenuation and decreased electrical length on low-cost PCB substrates. First, the complex material parameters of the used substrate and the used copper foil are extracted from 10 to 100 GHz to have accurate simulation models in CST Microwave Studio. This is necessary because the parameters provided by the manufacturer are often no longer generally valid in this frequency range. In addition, PCB materials have a significantly higher surface roughness compared with conventional materials for millimeter-wave applications. Therefore, the correct determination and the correct modeling of surface roughness is particularly important. Next, laminate is removed partially on the outer layer of the PCB to increase the electromagnetic field ratio in air. The undesired substrate is removed by a CO2 laser drilling machine by setting narrow drills sequentially. The RF performance of these waveguides is compared with those manufactured in conventional PCB technology according to attenuation and producibility.

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Felix Sepaintner, Andreas Scharl, Florian Keck, Kevin Kunze, Franz Xaver Röhrl, Werner Bogner, Stefan Zorn

Cost-Effective Implementation of Air-Filled Waveguides on Printed Circuit Boards

[Invited Talk]

Proceedings of the IEEE Conference on Electrical Performance of Electronic Packaging and Systems (EPEPS)

2020

DOI: 10.1109/EPEPS48591.2020.9231382

Abstract anzeigen

This paper presents a new cost-effective method to produce air-filled waveguides out of a printed circuit board (PCB) with a milling machine and how to implement them with standard PCB technology. For this purpose, low cost substrates like FR-4 are used. For the baseboard to waveguide transition in the E-Band (60-90GHz) a WR12 waveguide connector [1] was used. The WR12 waveguide was manufactured and analyzed on mechanical deviations. The RF performance in the E-Band was measured and compared to common PCB waveguides like microstrip lines (MS) and grounded coplanar waveguides (GCPW).

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Felix Sepaintner, Andreas Scharl, Franz Xaver Röhrl, Werner Bogner, Stefan Zorn

Extracting Complex PCB Substrate Permittivity from a Transmission Line using the Finite Difference Integral Method from 10 GHz - 100 GHz

[Invited Talk]

Proceedings of the 2020 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP)

2020

DOI: 10.1109/IMWS-AMP49156.2020.9199738

Abstract anzeigen

This paper presents a new numerical method to deduce the complex permittivity εr of PCB (printed circuit board) substrates. First, the attenuation and phase of an on board transmission line are measured with a vector network analyzer (VNA). The transmission line is then simulated with the finite difference integral method (FDI) with the substrate substituted by air. The measured and simulated phases are used, to calculate the effective permittivity and the real part of the complex permittivity εr ' . With known εr ' , the electromagnetic field distribution can be calculated, which is necessary to deduce the imaginary part of the permittivity. The shown algorithms can be used for frequencies up to 100 GHz and without any iterative processes.

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Andreas Scharl, Felix Sepaintner, Franz Xaver Röhrl, Werner Bogner, Stefan Zorn

Design and Comparison of Filter Structures in the Millimetre Wave Frequency Range on Outer- and Inner-Layers of Organic Circuits Boards

[Invited Talk]

Proceedings of the 2020 European Microwave Conference (EuMC)

2020

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Andreas Scharl, Felix Sepaintner, Franz Xaver Röhrl, Werner Bogner, Stefan Zorn

Simulation and Measurement of PCB Crossover Structures from DC up to 70 GHz

[Invited Talk]

Proceedings of the 2020 German Microwave Conference (GeMiC)

2020

Abstract anzeigen

In this paper, 4 different crossover structures in a 6-layered printed circuit board (PCB) for high operation frequencies are presented. The design for all structures is based on grounded coplanar waveguide (GCPW). Two fully planar structures, a quasi-coaxial transition and coaxial transition are realized and have a measured bandwidth from DC to 50 GHz and DC to 60 GHz, respectively. Moreover, two structures are designed in submount technology. Especially the connection between baseboard and package (solder junction) plays an important role to guarantee best signal integrity. Therefore, the quality of the solder junction is analysed in detail with TDR (time domain reflectometry) measurement as well as with X-ray images. The submount transitions show good radio frequency (RF) characteristics from DC to 70 GHz.

NachhaltigF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Michael Benisch, O. Fähnle, Rolf Rascher, Werner Bogner

Force and pressure analysis during overarm polishing

Proceedings of SPIE 11478 (Seventh European Seminar on Precision Optics Manufacturing [8 July 2020; Teisnach]), Bellingham, WA, USA

2020

DOI: 10.1117/12.2564903

Abstract anzeigen

The Preston-equation implies, that, besides the relative speed υrel and a specific constant KP, the pressure p plays a significant role for the removal rate when polishing an optical component. This paper demonstrates a possibility for a qualitative evaluation of the pressure distribution before the polishing process. A pressure-sensitive foil is used as a gauge for pressure measurement. The effectiveness of this measuring method is explained. Specific weaknesses and limitations in the use of these foils are discussed. A method for an integrated evaluation of the pressure on different spots of the polishing pad is proposed at the end of the paper.

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Franz Xaver Röhrl, Siegfried Hildebrand, Johannes Jakob, Stefan Zorn, Werner Bogner

Projekt NePUMuk (Neue digitale Produktions- und Mikrostrukturierungstechnologien für Anwendungen bis 80 GHz)

Abschlussbericht

2019

NachhaltigF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Michael Benisch, Werner Bogner, Rolf Rascher

Using A Digital Temperature Sensor To Measure The Temperature Development During A Polishing Process

Proceedings of the 2019 EOS Optical Technologies Conference

2019

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Zeitschriftenartikel

Franz Xaver Röhrl, Johannes Jakob, Werner Bogner, R. Weigel, Stefan Zorn

Bare die connections via aerosol jet technology for millimeter wave applications

International Journal of Microwave and Wireless Technologies, vol. 11, no. Special Issue 5-6 (EuMW 2018 Special Issue (Part I)) [June], pp. 441-446

2019

DOI: 10.1017/S1759078719000114

Abstract anzeigen

This paper presents a comparison of chip connections using aerosol jet (AJ) and bond technology on low-cost printed circuit board (PCB) substrates. First, the behavior of the used gap filler material and the used silver ink for AJ technology on PCBs are characterized. In addition to comparing the radio frequency (RF) performance (DC to 67 GHz) of the two technologies, the mechanical stability is also compared. While the AJ technology transitions score above all for their RF performance and the lower requirements (surface finish, pad size, and adhesion) on the PCB, the bonding technology has clear advantages, especially with a different coefficient of thermal expansion values of the substrates to be connected. Finally, the measurement results of a complete package are shown, whereby the chip connection is realized once by means of AJ and once by bonding wires.

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Vortrag

Johannes Jakob, R. Sammer, Franz Xaver Röhrl, Werner Bogner, Stefan Zorn

WR12 to planar transmission line transition on organic substrate

Invited Talk

49th European Microwave Conference (EuMC), Paris, Frankreich

2019

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Vortrag

Felix Sepaintner, Andreas Scharl, Franz Xaver Röhrl, Werner Bogner, Stefan Zorn

Simulation and Manufacturing of Low Loss PCB Structures with Additional Electromagnetic Field in Air

Invited Talk

IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes (IMWS-AMP), Bochum

2019

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Felix Sepaintner, Andreas Scharl, Franz Xaver Röhrl, Werner Bogner, Stefan Zorn

Simulation and Manufacturing of Low Loss PCB Structures with Additional Electromagnetic Field in Air

Proceedings of the IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes (IMWS-AMP) [July 16-18, 2019; Bochum]

2019

DOI: 10.1109/IMWS-AMP.2019.8880079

Abstract anzeigen

This paper presents a new method to produce different kinds of RF waveguides with reduced attenuation on low cost PCB substrates. First, microstrip (MS) and grounded coplanar waveguides (GCPW) are characterized by considering rough conductors in CST Microwave Studio. Next, laminate is partially removed, to increase the electromagnetic field ratio in air. Accordingly, the dielectric losses are reduced and the electrical length is decreased. These conductors are produced by using a CO 2 laserdrilling machine to remove the undesired substrate. The RF performance (DC to 100 GHz) of these waveguides is compared to transmission lines manufactured in conventional PCB technology. Finally, different kinds of simulated and produced microstrip filters are shown and fabrication tolerances are compared to those produced in standard technology.

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Johannes Jakob, R. Sammer, Franz Xaver Röhrl, Stefan Zorn, Werner Bogner

WR12 to planar transmission line transition on organic substrate

Proceedings of the 49th European Microwave Conference (EuMC)/European Microwave Week (EuMW) 2019 (September 29-October 4, 2019; Paris, France)

2019

DOI: 10.23919/EuMC.2019.8910843

Abstract anzeigen

Transitions for planar transmission lines on printed circuit boards to rectangular waveguide are challenging to design and manufacture. This paper introduces two transitions, the first one is a broadband transition from WR12 (60-90 GHz) waveguide to a stripline (SL) and the second is a narrowband transition to a grounded coplanar waveguide (GCPW). The focus at the first transition is based on the fact that signals can be transmitted in the complete E-Band. In the process, many manufacturing possibilities were exploited. For the second transition, the focus was on manufacturability in order to achieve the most cost effective transition possible. Design, simulated and measured results will be presented.

NachhaltigF: Elektrotechnik und MedientechnikI: IQMA

Vortrag

Tobias Berthold, Günther Benstetter, Werner Frammelsberger, Manuel Bogner, R. Rodríguez, M. Nafría

Protective nanometer films for reliable Cu-Cu connections

Invited Talk

IEEE International Reliability Physics Symposium (IRPS), San Francisco, CA, USA

2018

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Franz Xaver Röhrl, Johannes Jakob, Werner Bogner, R. Weigel, Stefan Zorn

Bare Die Connections via Aerosol Jet Technology for Millimeter Wave Applications

Proceedings of the 48th European Microwave Conference (EuMC)/European Microwave Week (EuMW) 2018 (September 24-28, 2018; Madrid, Spain)

2018

DigitalF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenS: IPH Teisnach

Franz Xaver Röhrl, Siegfried Hildebrand, Johannes Jakob, Stefan Zorn, Werner Bogner

Projekt NePUMuk (Neue digitale Produktions- und Mikrostrukturierungstechnologien für Anwendungen bis 80 GHz)

Projektbericht

2017

DigitalF: Elektrotechnik und Medientechnik

Beitrag (Sammelband oder Tagungsband)

Franz Xaver Röhrl, Roman Sammer, Johannes Jakob, Werner Bogner, R. Weigel, U. Hassel, Stefan Zorn

Cost-Effective SIW Band-Pass Filters for Millimeter Wave Applications

Proceedings of the 47th European Microwave Conference (EuMC)/European Microwave Week (EuMW) 2017 (October 8-12, 2017, Nürnberg)

2017

DOI: 10.23919/EuMC.2017.8230878

NachhaltigF: Elektrotechnik und MedientechnikF: Maschinenbau und MechatronikI: IQMA

Beitrag (Sammelband oder Tagungsband)

Tobias Berthold, Günther Benstetter, Werner Frammelsberger, Manuel Bogner, R. Rodríguez, M. Nafría

Protective nanometer films for reliable Cu-Cu connections

Best Paper Award

Proceedings of the 28th European Symposium on Reliability of Electron Devices, Failure Physics and Analysis (ESREF) [25-28 September, 2017; Bordeaux, Frankreich]

2017

NachhaltigF: Elektrotechnik und MedientechnikF: Maschinenbau und MechatronikI: IQMA

Zeitschriftenartikel

Tobias Berthold, Günther Benstetter, Werner Frammelsberger, Manuel Bogner, R. Rodríguez, M. Nafría

Protective nanometer films for reliable Cu-Cu connections

Microelectronics Reliability, vol. 76-77, no. September, pp. 383-389

2017

DOI: 10.1016/j.microrel.2017.07.001

DigitalS: IPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Franz Xaver Röhrl, Johannes Jakob, Werner Bogner, D. Hageneder, Stefan Zorn

Differential Wideband Interconnects for Organic Millimeter Wave Chip Packages

An effort to design an all-purpose RF chip package

Proceedings of the 11th European Microwave Integrated Circuits Conference 2016 (October 03-04 2016, London, UK)

2016