Suche nach „[U.] [Martin]“ hat 2 Publikationen gefunden
Suchergebnis als PDF
    F: Maschinenbau und Mechatronik


    Thomas Petersmeier, U. Martin, D. Eifler, H. Oettel

    Cyclic fatigue loading and characterization of dislocation evolution in the ferritic steel X22CrMoV121

    International Journal of Fatigue, vol. 20, no. 3


    Abstract anzeigen

    Isothermal cyclic deformation tests have been performed with the steel X22CrMoV121 in the temperature range 20°C ⩽ T ⩽ 600°C. The fatigue behaviour was related to microstructural changes in the bulk material. The dislocation density was determined for selected fatigue states by means of transmission electron microscopy. The material is characterized by cyclic softening in the investigated temperature range. Increasing temperatures and increasing stress amplitudes lead to an increase of the plastic strain amplitudes and a corresponding reduction of the number of cycles to failure. In the temperature range 250°C ⩽ T ⩽ 350°C dynamic strain ageing processes occur and maximum dislocation densities are observed. Generally the dislocation density decreases with increasing number of cycles and temperatures.

    F: Elektrotechnik und Medientechnik


    C.-J. Lorenzen, C. Carlhoff, U. Hahn, Martin Jogwich

    Application of Laser-Induced Emission Spectral Analysis for Industrial Process and Quality Control

    Journal of Analytical Atomic Spectrometry, vol. 7, no. 6, pp. 1029-1035


    DOI: 10.1039/JA9920701029

    Abstract anzeigen

    Laser-induced emission spectral analysis (LIESA, a registered trademark of instruments developed by Krupp), better known in the literature as laser microanalysis or laser-induced breakdown spectroscopy, is a suitable method for the direct in-process measurement of elemental concentrations in various solid and liquid materials. This method has been developed recently by Krupp for in-process quality assurance and process control in different industrial branches such as steel production and plant making. As a result several LIESA instruments have already been developed or are under development for marketing. In all cases on-line and in-process elemental analysis of materials at various stages of production yield information on the quality of the material and the fabrication process. The beam of a pulsed high-power laser (irradiance: 1 × 108–5 × 109 W cm–2), focused onto the solid or liquid sample surface in an ambient gas atmosphere of normal pressure (focus area≈ablation area, 0.1–6 mm2), produces a hot bright plasma (early electron temperatures, 20000–30000 K). The emitted plasma light is observed end-on and passes by way of an optical fibre bundle to a spectrometer, where it is detected in the focal plane by means of an optical multichannel analyser with high time resolution (on the microsecond scale). A fast computer evaluates the measured spectra and calculates the element concentrations via calibration procedures. Relative detection limits of between 10 and 100 ppm can be achieved for most of the detectable elements in various matrices (steel, rubber, rock and glass). Procedures are available to convert relative measurements with relative standard deviations of between 1 and 2% into absolute concentration values with relative accuracies of about 3%.