Suche nach „[R.] [Wagner]“ hat 3 Publikationen gefunden
Suchergebnis als PDF
    DigitalMobilF: Europan Campus Rottal-Inn


    de Oliveira Hansen, R. M. D., M. Mátéfi-Tempfli, R. Safonovs, J. Adam, S. Chemnitz, T. Reimer, B. Wagner, W. Benecke, Stefan Mátéfi-Tempfli

    Magnetic films for electromagnetic actuation in MEMS switches

    Microsystem Technologies, vol. 24, no. 4, pp. 1987-1994


    DOI: 10.1007/s00542-017-3595-2

    Abstract anzeigen

    This paper investigates the fabrication of magnetic films via electroplating to be applied into electromagnetic actuated micro electro-mechanical systems (MEMS) switches. Cobalt and nickel films (1 µm thicknesses) were deposited on gold coated silicon substrates via electrochemical deposition. Different deposition conditions were investigated, regarding temperature and deposition voltage. The films morphologies were characterized via atomic force microscopy, while the magnetic properties of the films were characterized via vibrating sample magnetometer measurements. In order to evaluate the integration of these magnetic films into MEMS switches with low energy consumption, a mathematical model was developed and the results show that these films can be applied into efficient actuation with reduced power dissipation.

    DigitalF: Angewandte InformatikS: TC Plattling MoMo

    Beitrag (Sammelband oder Tagungsband)

    R. Wagner, U. Frese, Berthold Bäuml

    Unified treatment of sparse and dense data in graph-based least squares

    Proceedings of the 2016 IEEE-RAS 16th International Conference on Humanoid Robots (Humanoids 2016) [November 15-17, 2016; Cancún, Mexico]


    DOI: 10.1109/HUMANOIDS.2016.7803393

    Abstract anzeigen

    In this paper, we present a novel method of incorporating dense (e.g., depth, RGB-D) data in a general purpose least-squares graph optimization framework. Rather than employing a loosely coupled, layered design where dense data is first used to estimate a compact SE(3) transform which then forms a link in the optimization graph as in previous approaches [28, 10, 26], we use a tightly coupled approach that jointly optimizes over each individual (i.e. per-pixel) dense measurement (on the GPU) and all other traditional sparse measurements (on the CPU). Concretely, we use Kinect depth data and KinectFusion-style point-to-plane ICP measurements. In particular, this allows our approach to handle cases where neither dense, nor sparse measurements separately define all degrees of freedom (DoF) while taken together they complement each other and yield the overall maximum likelihood solution. Nowadays it is common practice to flexibly model various sensors, measurements and to be estimated variables in least-squares frameworks. Our intention is to extend this flexibility to applications with dense data. Computationally, the key is to combine the many dense measurements on the GPU efficiently and communicate only the results to the sparse framework on the CPU in a way that is mathematically equivalent to the full least-squares system. This results in <;20 ms for a full optimization run. We evaluate our approach on a humanoid robot, where in a first experiment we fuse Kinect data and odometry in a laboratory setting, and in a second experiment we fuse with an unusual “sensor”: using the embodiedness of the robot we estimate elasticities in the kinematic chain modeled as unknown, time-varying joint offsets while it moves its arms in front of a tabletop manipulation workspace. In both experiments only tightly coupled optimization will localize the robot correctly.

    F: Elektrotechnik und MedientechnikI: IQMA


    S. Rogowsky, R. Ostendorf, G. Kaufel, W. Pletschen, J. Wagner, S. Liebich, M. Zimprich, K. Volz, W. Stolz, B. Kunert, Edgar Lodermeier, Heiko Ranzinger, Günther Benstetter

    Characteristics of diode laser structures on silicon substrates based on the Ga(NAsP)/(BGa)(AsP) materials combination

    Photonics West, San Francisco, CA, USA