Publikationen


Suche nach „[S.] [Wang]“ hat 8 Publikationen gefunden
Suchergebnis als PDF
    NachhaltigF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenF: Europan Campus Rottal-Inn

    Zeitschriftenartikel

    L. Guo, Rui Li, S. Wang, M. Flad, W. Maschek, A. Rineiski

    Numerical investigation of SIMMER code for fuel-coolant interaction

    International Journal of Hydrogen Energy, vol. 41, no. 17, pp. 7227-7232

    2016

    DOI: 10.1016/j.ijhydene.2016.01.080

    Abstract anzeigen

    Fuel-coolant interaction (FCI) is a very complex but important issue in the safety analysis of the severe accidents for nuclear reactors due to the rapid multiple thermos–hydrodynamic activities. Until now, there are still large uncertainties existing in various phases during the FCI process, such as the melt solidification, fragmentation and relocation, film boiling on the melt surface, coolant vaporization and following vapor explosion, and so on. SIMMER-III code was first developed to analyses core disruptive accidents in liquid-metal fast reactors (LMFRs) as an integral numerical tool coupling multiphase thermal hydraulic code with neutron kinetics model, and was demonstrated its reasonable flexibility in some FCI simulations. In this paper, the applicability of the code in simulating the premixing phase of FCI process is verified in comparison with a related jet-type experiment in literature. In addition, the sensitivity analysis on several key parameters of the related models in the SIMMER code was performed to assess the impacts in the simulation of the FCI premix phase. It is expected that the results can provide some numerical experience for the uncertainty analysis of FCI calculation using SIMMER-III code.

    NachhaltigF: Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen

    Zeitschriftenartikel

    S. Liu, S. Dai, C. Sang, J. Sun, Thomas Stirner, D. Wang

    Molecular dynamics simulation of the formation, growth and bursting of bubbles in tungsten exposed to high fluxes of low energy deuterium

    Journal of Nuclear Materials - PLASMA-SURFACE INTERACTIONS 21 — Proceedings of the 21st International Conference on Plasma-Surface Interactions in Controlled Fusion Devices Kanazawa, Japan, May 26-30, 2014, vol. 463, no. August, pp. 363-366

    2015

    DOI: 10.1016/j.jnucmat.2014.12.060

    Abstract anzeigen

    Molecular dynamics simulations are carried out to investigate the formation, growth and bursting of bubbles in tungsten exposed to the irradiation of an extremely high deuterium flux. It is found that the bubbles form in the region near the location of the implanted ion distribution peaks, and that the effect of the substrate temperature on the bubble formation depth is negligible; it is also found that the percentage of deuterium that is found in D2 molecules increases as the bubble grows, and that the evolution of the bubble’s internal pressure is strongly associated with the properties of its surrounding structure. The simulations display the development of a dome-shaped structure at the tungsten surface during the bubble growth. The merging of two deuterium bubbles is also observed. The present simulations also show that the bubble bursts by generating a partially opened lid, which has already been observed in previous independent experiments.

    DigitalF: Angewandte Informatik

    Beitrag (Sammelband oder Tagungsband)

    K. Wang, K. Brunnström, Marcus Barkowsky, M. Urvoy, M. Sjöström, P. Le Callet, S. Tourancheau, B. Andrén

    Stereoscopic 3D video coding quality evaluation with 2D objective metrics

    Proceedings of SPIE Vol. 8648: Stereoscopic Displays and Applications XXIV

    2013

    Abstract anzeigen

    The 3D video quality is of highest importance for the adoption of a new technology from a user’s point of view. In this paper we evaluated the impact of coding artefacts on stereoscopic 3D video quality by making use of several existing full reference 2D objective metrics. We analyzed the performance of objective metrics by comparing to the results of subjective experiment. The results show that pixel based Visual Information Fidelity metrics fits subjective data the best. The 2D stereoscopic video quality seems to have dominant impact on the coding artefacts impaired stereoscopic videos.

    DigitalF: Angewandte Informatik

    Beitrag (Sammelband oder Tagungsband)

    Marcus Barkowsky, J. Li, T. Han, S. Youn, J. Ok, C. Lee, I. Vijai Ananth, K. Wang, K. Brunnström, P. Le Callet

    Towards standardized 3DTV QoE assessment: Cross-lab study on display technology and viewing environment parameters

    Proceedings of SPIE Vol. 8648: Stereoscopic Displays and Applications XXIV;

    2013

    Abstract anzeigen

    Subjective assessment of Quality of Experience in stereoscopic 3D requires new guidelines for the environmental setup as existing standards such as ITU-R BT.500 may no longer be appropriate. A first step is to perform cross-lab experiments in different viewing conditions on the same video sequences. Three international labs performed Absolute Category Rating studies on a freely available video database containing degradations that are mainly related to video quality degradations. Different conditions have been used in the labs: Passive polarized displays, active shutter displays, differences in viewing distance, the number of parallel viewers, and the voting device. Implicit variations were introduced due to the three different languages in Sweden, South Korea, and France. Although the obtained Mean Opinion Scores are comparable, slight differences occur in function of the video degradations and the viewing distance. An analysis on the statistical differences obtained between the MOS of the video sequences revealed that obtaining an equivalent number of differences may require more observers in some viewing conditions. It was also seen that the alignment of the meaning of the attributes used in Absolute Category Rating in different languages may be beneficial. Statistical analysis was performed showing influence of the viewing distance on votes and MOS results.

    DigitalF: Angewandte Informatik

    Beitrag (Sammelband oder Tagungsband)

    S. Tourancheau, K. Wang, J. Bulat, R. Cousseau, L. Janowski, K. Brunnström, Marcus Barkowsky

    Reproducibility of crosstalk measurements on active glasses 3D LCD displays based on temporal characterization

    Proceedings of SPIE Vol. 8288: Stereoscopic Displays and Applications XXIII

    2012

    ISBN: 9780819489357

    Abstract anzeigen

    Crosstalk is one of the main display-related perceptual factors degrading image quality and causing visual dis-comfort on 3D-displays. It causes visual artifacts such as ghosting eects, blurring, and lack of color delitywhich are considerably annoying and can lead to diculties to fuse stereoscopic images. On stereoscopic LCDwith shutter-glasses, crosstalk is mainly due to dynamic temporal aspects: imprecise target luminance (highlydependent on the combination of left-view and right-view pixel color values in disparity regions) and synchro-nization issues between shutter-glasses and LCD. These dierent factors inuence largely the reproducibilityof crosstalk measurements across laboratories and need to be evaluated in several dierent locations involvingsimilar and diering conditions. In this paper we propose a fast and reproducible measurement procedure forcrosstalk based on high-frequency temporal measurements of both display and shutter responses. It permitsto fully characterize crosstalk for any right/left color combination and at any spatial position on the screen.Such a reliable objective crosstalk measurement method at several spatial positions is considered a mandatoryprerequisite for evaluating the perceptual inuence of crosstalk in further subjective studies.

    DigitalF: Angewandte Informatik

    Zeitschriftenartikel

    Marcus Barkowsky, S. Tourancheau, K. Brunnström, K. Wang, B. Andrén

    55.3: Crosstalk Measurements of Shutter Glasses 3D Displays

    SID Symposium Digest of Technical Papers, vol. 42, no. 1, pp. 812-815

    2011

    Abstract anzeigen

    Crosstalk is probably one of the main perceptual factors contributing to perceived image quality and visual comfort. The Video Quality Experts Group (VQEG) within their 3D video quality project is specifying a practical measurement procedure that will produce consistent results across laboratories. This paper is part of that effort. Two different method of measuring cross talk on shutter glasses stereo displays have been studied. One is based on time average luminance measurements and the other on temporal measurements. The results show that crosstalk is roughly 0.5% but that there are differences in the crosstalk between the two eyes in the shutter glasses.

    NachhaltigF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenF: Europan Campus Rottal-Inn

    Zeitschriftenartikel

    P. Arendt, S. Foltyn, L. Civale, R. DePaula, P. Dowden, J. Groves, T. Holesinger, Jia, Q. X., Sascha Kreiskott, L. Stan, I. Usov, H. Wang, J. Coulter

    High critical current YBCO coated conductors based on IBAD MgO

    Physica C: Superconductivity, vol. 412-414, no. October, pp. 795-800

    2004

    DOI: 10.1016/j.physc.2003.12.074

    Abstract anzeigen

    This report describes recent developments of second-generation Y1Ba2Cu3O7−δ (YBCO) coated conductors deposited on biaxially textured MgO templates. The materials system architecture implemented to achieve high critical currents in YBCO films is described. The average full-width at half maximum (FWHM) in-plane texture obtained for MgO films processed on meter-length tapes is 7°, while that for the YBCO films is 3°. The best YBCO in-plane values approach 2° and the out-of-plane values approach 1°. Critical currents (1 cm wide tapes, 75 K, self field) have attained 423 A for 7 cm length and 233 A for 50 cm length tapes.

    NachhaltigF: Angewandte Naturwissenschaften und WirtschaftsingenieurwesenF: Europan Campus Rottal-Inn

    Zeitschriftenartikel

    S. Foltyn, P. Arendt, Jia, Q. X., H. Wang, MacManus-Driscoll, J. L., Sascha Kreiskott, R. DePaula, L. Stan, J. Groves, P. Dowden

    Strongly coupled critical current density values achieved in Y1Ba2Cu3O7−δ coated conductors with near-single-crystal texture

    Applied Physics Letters, vol. 82, no. 25, pp. 4519-4521

    2003

    DOI: 10.1063/1.1584783

    Abstract anzeigen

    One of the most intensely researched subjects in the development of YBa2Cu3O7−δ (YBCO)-based coated conductors is the methodology for achieving ever-sharper film texture on flexible metal substrates. This is a critical issue due to the intrinsic weak-link behavior that results in depressed critical current density (Jc) in polycrystalline YBCO. Using ion-beam-assisted deposition of magnesium oxide, we have achieved YBCO texture on superalloy substrates approaching that on single-crystal oxide substrates. This advance has allowed us to fabricate coated conductor samples with Jcs that are as high as for films on oxide crystals; for example, >2 MA/cm2 (75 K, self-field) at a YBCO thickness of ∼1.5 μm.