Suche nach „[M.] [Müller]“ hat 19 Publikationen gefunden

GesundAngewandte Gesundheitswissenschaften

Zeitschriftenartikel

A. Kobleder, N. Nikolic, Mareike Hechinger, K. Denhaerynck, M. Hampl, M. Müller, B. Senn

Perceived Health-Related Quality of Life in Women with Vulvar Neoplasia: A Cross Sectional Study

International Journal of Gynecological Cancer, vol. 26, no. 7, pp. 1313-1319

2016

DOI: 10.1097/IGC.0000000000000770

Abstract anzeigen

Objective The aim of the study was to determine health-related quality of life (HRQoL) of women with surgically treated vulvar intraepithelial neoplasia (VIN) and vulvar cancer (VC) during the first week after hospital discharge. Further objectives were to investigate differences between women with VIN and VC as well as to examine whether correlations exist between women’s symptom experience and HRQoL. Methods This cross-sectional study was conducted in 8 hospitals in Germany and Switzerland. Women with VIN and VC rated HRQoL with the validated German Short-Form 36. Differences between HRQoL in women with VIN and VC were tested with Wilcoxon rank-sum score. The WOMen with vulvAr Neoplasia (WOMAN) - Patient reported Outcome (PRO) self-report instrument was used to measure women’s symptom experience. Correlations between symptoms and HRQoL were calculated using Spearman correlation coefficient. Results Women with VIN and VC (n = 65) reported lower HRQoL in physical aspects (Physical Component Summary [PCS], 34.9) than that in mental aspects (Mental Component Summary, 40.5). Women with VC had lower HRQoL than women with VIN, as manifested by significant differences concerning the dimensions of “physical functioning” and “role-physical.” “Difficulties in daily life” as a distressing symptom correlated with MCS and PCS. Wound-related symptoms correlated with PCS and psychosocial symptoms/issues with MCS. Conclusions Analysis showed that women with vulvar neoplasia reported lower HRQoL in the physical and mental dimensions 1 week after discharge than comparable studies referring to months or years after surgery. Health-related quality of life is influenced by physical impairment because physical symptoms are prevalent 1 week after discharge. Patient education should focus on symptom management in an early postsurgical phase to enhance women’s HRQoL.

DigitalElektrotechnik und Medientechnik

Beitrag (Sammelband oder Tagungsband)

Andreas Fischer, T. Kittel, B. Kolosnjaji, T. Lengyel, W. Mandarawi, H. Reiser, B. Taubmann, E. Weishäupl, H. Meer, T. Müller, M. Protsenko

CloudIDEA: A Malware Defense Architecture for Cloud Data Centers

Proceedings of the 5th International Symposium on Cloud Computing, Trusted Computing and Secure Virtual Infrastructures (C&TC 2015) [Rhodes, Greece; October 26-28, 2015]

2015

TC Grafenau

Beitrag (Sammelband oder Tagungsband)

Nari Arunraj, Diane Ahrens, Michael Fernandes, M. Müller

Time series sales forecasting to reduce food waste in retail industry

Proceedings of The 34th International Symposium on Forecasting - Economic Forecasting: Past, Present and Future (June 29th - July 2nd 2014, Rotterdam, The Netherlands)

2014

Fraunhofer AWZ CTMTMaschinenbau und Mechatronik

Beitrag (Sammelband oder Tagungsband)

P. Müller, Jochen Hiller, A. Cantatore, M. Bartscher, L. Chiffre

New reference object for Metrological performance testing of industrial CT systems

Proceedings of the 12th euspen International Conference (Juni 2012, Stockholm, Schweden)

2012

Fraunhofer AWZ CTMTMaschinenbau und Mechatronik

Vortrag

P. Müller, Jochen Hiller, A. Cantatore, M. Bartscher, L. Chiffre

Investigation on the influence of image quality in X-ray CT metrology

Conference on Industrial Computed Tomography (ICT), Wels, Österreich

2012

Maschinenbau und Mechatronik

Zeitschriftenartikel

U. Farwick, E. Angert, Simone Walker-Hertkorn, M. Kübert, J. Müller

Wärme aus altem Bergwerksschacht – Möglichkeiten der Tiefen Geothermie im Wohnungsbau

bbr - Fachmagazin für Brunnen- und Leitungsbau (Sonderheft Tiefe Geothermie), vol. 61, pp. 80-82

2010

Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen

Beitrag (Sammelband oder Tagungsband)

S. Weide, P. Gege, C. Schwarz, M. Bachmann, S. Holzwarth, M. Habermeyer, P. Müller, P. Haschberger, Paul Schötz, K. Lenhard, E. Bogner, T. Schwarzmaier

Flugzeuggetragene hyperspektrale Fernerkundung am Deutschen Zentrum für Luft- und Raumfahrt (DLR)

Vorträge Dreiländertagung - Wissenschaftlich-Technische Jahrestagung der DGPF, 01.-03.07.2010, Wien, Österreich, vol. 19

2010

Angewandte Wirtschaftswissenschaften

Beitrag (Sammelband oder Tagungsband)

Georg Herde, A. Müller, M. Riedl

Digitale Datenanalyse in der Internen Revision: Eine bewährte Prüfmethodik – besonders mit innovativen Weiterentwicklungen

Innovative Prüfungstechniken und Revisionsvorgehensweisen, Frankfurt School of Finance & Management , Frankfurt am Main

2007

ISBN: 978-3-937519-51-7

Angewandte Wirtschaftswissenschaften

Beitrag (Sammelband oder Tagungsband)

H. Stoyan, M. Müller, R. Bimazubute, B. Grippe, C. Hausdorf, M. Hormeß, G. Kraetzschmar, Josef Schneeberger, A. Turk

Wissenserwerb und Wissensmanagement

Wissen in Aktion, no. 41

2004

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenTC Teisnach Sensorik

Beitrag (Sammelband oder Tagungsband)

J. Schulze, W. Ehrfeld, J. Hoßfeld, M. Klaus, Maria Kufner, S. Kufner, H. Müller, A. Picard

Parallel optical interconnetion using self adjusting microlenses on injection moulded ferrules made by LIGA technique

Proceedings of Optical System Design and Production

1999

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenTC Teisnach Sensorik

Zeitschriftenartikel

H. Treichel, Günther Ruhl, P. Ansmann, R. Würl, C. Müller, M. Dietlmeier

Low dielectric constant materials for interlayer dielectric

(Invited Paper)

Microelectronic Engineering, vol. 40, no. 1, pp. 1-19

1998

DOI: 10.1016/S0167-9317(97)00185-8

Abstract anzeigen

The more advanced an integrated circuit becomes, the more stringent are the demands for certain properties of a dielectric or insulating material. In addition, it is essential that the layer maintain its specific electrical, physical and chemical properties after incorporation in the device structure and during subsequent processing. Due to temperature budget constraints and the accelerated decrease of feature sizes below 0.25 μm one can no longer rely on traditional choices but has to search for alternatives, both for low and high permittivity replacements. In the article we survey currently used low dielectric constant materials and future trends for micro-electronic applications.

Angewandte Wirtschaftswissenschaften

Beitrag (Sammelband oder Tagungsband)

M. Müller, C. Hausdorf, Josef Schneeberger

Zur Interessantheit bei der Entdeckung von Wissen in Datenbanken

Data Mining – Theoretische Aspekte und Anwendungen, Heidelberg

1998

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenTC Teisnach Sensorik

Beitrag (Sammelband oder Tagungsband)

H. Treichel, Günther Ruhl, R. Würl, P. Ansmann, C. Müller, M. Dietlmeier

Dielectric Materials and Insulators for Microelectronics

Chemical vapor deposition, Pennington, NJ, vol. 97-25

1997

ISBN: 1-566-77178-1

Angewandte Wirtschaftswissenschaften

Beitrag (Sammelband oder Tagungsband)

O. Büchter, M. Müller, Josef Schneeberger

Improving Forward Selection with Background Knowledge: Finding Interesting Multiple Regression Models for Sales Prediction

Knowledge Discovery and Data Mining: Techniques and Applications. Proc. of the First Pacific-Asia Conference

1997

Angewandte Wirtschaftswissenschaften

Beitrag (Sammelband oder Tagungsband)

M. Müller, Josef Schneeberger, H. Stoyan

Die Konfiguration von Turbinen-Anlagen mit NEXPERT OBJECT

Objektorientierte und regelbasierte Wissensverarbeitung. (= Angewandte Informatik), Heidelberg, Berlin, Oxford

1995

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenTC Teisnach Sensorik

Zeitschriftenartikel

S. Kufner, Maria Kufner, M. Frank, A. Müller, K.-H. Brenner

3D integration of refractive microoptical components by deep proton irradiation

Pure and Applied Optics: Journal of the European Optical Society Part A, vol. 2, no. 2, pp. 111-124

1993

DOI: 10.1088/0963-9659/2/2/004

Abstract anzeigen

An integration of microoptical components to three-dimensional systems is of interest for optical information processing as well as for optical interconnections. Polymethyl methacrylate (PMMA) is a suitable substrate material, because microprisms, beamsplitters and microlenses can be integrated monolithically in the same substrate by deep proton irradiation. The microcomponents can be combined to compact microoptical imaging systems which are easy to align. The fabrication method and the imaging properties of this system are discussed.

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenTC Teisnach Sensorik

Zeitschriftenartikel

K.-H. Brenner, Maria Kufner, S. Kufner, J. Moisel, A. Müller, S. Sinzinger, M. Testorf, J. Göttert, J. Mohr

Application of three-dimensional micro-optical components formed by lithography, electroforming, and plastic molding

Applied Optics, vol. 3232, no. 92, pp. 6464-6469

1993

DOI: 10.1364/AO.32.006464

Abstract anzeigen

Micro-optics is usually associated with planar waveguides or integrated optical circuits. In this case the propagation of light is restricted to one or two dimensions, and the three-dimensional nature of light propagation is disregarded. We present a method of fabricating three-dimensional micro-optical components by the so-called LIGA process, a lithography, electroforming, and plastic molding process in which poly(methyl methacrylate) is structured by high-energy synchrotron radiation. We demonstrate an experimental system of image formation that uses microprisms and microlenses for a three-dimensional microintegration of optical components.

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenTC Teisnach Sensorik

Beitrag (Sammelband oder Tagungsband)

K.-H. Brenner, M. Frank, Maria Kufner, S. Kufner, A. Müller

Deep proton irradiation of PMMA for a 3D integration of micro-optical components

Integrated Optics and Micro-Optics with Polymers, Wiesbaden

1993

ISBN: 978-3-322-93431-4

Abstract anzeigen

An integration of microoptical components to threedimensional systems is of interest for optical information processing as well as for optical interconnections. Polymethyl methacrylate (PMMA) is a suitable substrate material, because microprisms, beamsplitters and microlenses can be integrated monolithically in the same substrate by deep proton irradiation. The microcomponents can be combined to compact microoptical imaging systems which are easy to align. The fabrication method and the imaging properties of this system are discussed and applications are outlined.

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenTC Teisnach Sensorik

Beitrag (Sammelband oder Tagungsband)

K.-H. Brenner, M. Frank, Maria Kufner, S. Kufner, J. Moisel, A. Müller, S. Sinzinger, M. Testorf, J. Göttert, J. Mohr

Microoptical setup with microlenses and microprisms based on refractive optics

Proceedings of SPIE Vol. 1806: Optical Computing

1992