Suche nach „[Jakob] [Johannes]“ hat 13 Publikationen gefunden

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

Franz Xaver Röhrl, Siegfried Hildebrand, Johannes Jakob, Stefan Zorn, Werner Bogner

Projekt NePUMuk (Neue digitale Produktions- und Mikrostrukturierungstechnologien für Anwendungen bis 80 GHz)

Abschlussbericht

2019

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

Zeitschriftenartikel

Franz Xaver Röhrl, Johannes Jakob, Werner Bogner, R. Weigel, Stefan Zorn

Bare die connections via aerosol jet technology for millimeter wave applications

International Journal of Microwave and Wireless Technologies, vol. 11, no. Special Issue 5-6 (EuMW 2018 Special Issue (Part I)) [June], pp. 441-446

2019

DOI: 10.1017/S1759078719000114

Abstract anzeigen

This paper presents a comparison of chip connections using aerosol jet (AJ) and bond technology on low-cost printed circuit board (PCB) substrates. First, the behavior of the used gap filler material and the used silver ink for AJ technology on PCBs are characterized. In addition to comparing the radio frequency (RF) performance (DC to 67 GHz) of the two technologies, the mechanical stability is also compared. While the AJ technology transitions score above all for their RF performance and the lower requirements (surface finish, pad size, and adhesion) on the PCB, the bonding technology has clear advantages, especially with a different coefficient of thermal expansion values of the substrates to be connected. Finally, the measurement results of a complete package are shown, whereby the chip connection is realized once by means of AJ and once by bonding wires.

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

Vortrag

Johannes Jakob, R. Sammer, Franz Xaver Röhrl, Werner Bogner, Stefan Zorn

WR12 to planar transmission line transition on organic substrate

Invited Talk

49th European Microwave Conference (EuMC), Paris, Frankreich

2019

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Sebastian Sitzberger, Johannes Liebl, Jakob Reitberger, Rolf Rascher

Zero-point clamping systems in optical production

Proceedings of SPIE 11171 (Sixth European Seminar on Precision Optics Manufacturing, 1117101 [April 9th-10th 2019, Teisnach]), Bellingham, WA, USA

2019

DOI: 10.1117/12.2528774

Abstract anzeigen

Zero point clamping systems are an integral part of the manufacturing industry. They have only yet to find their way into the optical industry. This article compares the hydraulic expansion holder, a clamping system currently used in the optical industry with a zero-point clamping system. The achievable accuracies of both systems are compared over several measurement series. In addition, the process capability evaluation is used for the comparison. Finally, the results are summarized to provide every researcher and practitioner with a foundation for assessing whether zero point clamping systems meet the requirements for the use in optical manufacturing.

DigitalNachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Johannes Jakob, R. Sammer, Franz Xaver Röhrl, Stefan Zorn, Werner Bogner

WR12 to planar transmission line transition on organic substrate

Proceedings of the 49th European Microwave Conference (EuMC)/European Microwave Week (EuMW) 2019 (September 29-October 4, 2019; Paris, France)

2019

DOI: 10.23919/EuMC.2019.8910843

Abstract anzeigen

Transitions for planar transmission lines on printed circuit boards to rectangular waveguide are challenging to design and manufacture. This paper introduces two transitions, the first one is a broadband transition from WR12 (60-90 GHz) waveguide to a stripline (SL) and the second is a narrowband transition to a grounded coplanar waveguide (GCPW). The focus at the first transition is based on the fact that signals can be transmitted in the complete E-Band. In the process, many manufacturing possibilities were exploited. For the second transition, the focus was on manufacturability in order to achieve the most cost effective transition possible. Design, simulated and measured results will be presented.

NachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

Beitrag (Sammelband oder Tagungsband)

Franz Xaver Röhrl, Johannes Jakob, Werner Bogner, R. Weigel, Stefan Zorn

Bare Die Connections via Aerosol Jet Technology for Millimeter Wave Applications

Proceedings of the 48th European Microwave Conference (EuMC)/European Microwave Week (EuMW) 2018 (September 24-28, 2018; Madrid, Spain)

2018

Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen

Vortrag

Johannes Jakob

Rechnergestützte Optimierung von galvanischen Kupferabscheideprozessen

Posterpräsentation

5. Tag der Forschung, Deggendorf

2018

DigitalNachhaltigAngewandte Naturwissenschaften und WirtschaftsingenieurwesenIPH Teisnach

Franz Xaver Röhrl, Siegfried Hildebrand, Johannes Jakob, Stefan Zorn, Werner Bogner

Projekt NePUMuk (Neue digitale Produktions- und Mikrostrukturierungstechnologien für Anwendungen bis 80 GHz)

Projektbericht

2017

NachhaltigElektrotechnik und Medientechnik

Beitrag (Sammelband oder Tagungsband)

Franz Xaver Röhrl, Roman Sammer, Johannes Jakob, Werner Bogner, R. Weigel, U. Hassel, Stefan Zorn

Cost-Effective SIW Band-Pass Filters for Millimeter Wave Applications

Proceedings of the 47th European Microwave Conference (EuMC)/European Microwave Week (EuMW) 2017 (October 8-12, 2017, Nürnberg)

2017

DOI: 10.23919/EuMC.2017.8230878

NachhaltigSonstige

Beitrag (Sammelband oder Tagungsband)

Franz Xaver Röhrl, Johannes Jakob, Werner Bogner, D. Hageneder, Stefan Zorn

Differential Wideband Interconnects for Organic Millimeter Wave Chip Packages

An effort to design an all-purpose RF chip package

Proceedings of the 11th European Microwave Integrated Circuits Conference 2016 (October 03-04 2016, London, UK)

2016

NachhaltigElektrotechnik und Medientechnik

Beitrag (Sammelband oder Tagungsband)

Franz Xaver Röhrl, Johannes Jakob, Werner Bogner, D. Hageneder, Stefan Zorn

Differential Wideband Interconnects for Organic Millimeter Wave Chip Packages

An effort to design an all-purpose RF chip package

Proceedings of the 46th European Microwave Conference (EuMC)/European Microwave Week (EuMW) 2016 (October 03-07 2016, London, UK)

2016

DigitalAngewandte Naturwissenschaften und Wirtschaftsingenieurwesen

Beitrag (Sammelband oder Tagungsband)

Franz Xaver Röhrl, Johannes Jakob, Werner Bogner, D. Hageneder

Wideband RF interconnects for organic chip packages comparison of single ended and differential transitions

An effort to design an all-purpose RF chip package

Proceedings of the 45th European Microwave Conference (EuMC)/European Microwave Week (EuMW) 2015 (September 06-11 2015, Paris, France)

2015

Elektrotechnik und Medientechnik

Beitrag (Sammelband oder Tagungsband)

A. Bauer, Johannes Jakob, R. Gmiha, D. Hageneder, Werner Bogner

Embedded Resistors for High Frequency Applications on Printed Circuit Boards

Proceedings of the 43rd European Microwave Conference, Nürnberg, 06.-11.10.2013

2013