Suche nach „[G.] [Song]“ hat 2 Publikationen gefunden
Suchergebnis als PDF
    NachhaltigF: Elektrotechnik und MedientechnikI: IQMA


    W. Ni, L. Liu, Y. Zhang, C. Niu, H. Fan, G. Song, D. Liu, Günther Benstetter, G. Lei

    Effect of intermittent He/D ion irradiations on W nano-fuzz growth over W targets

    Vacuum, vol. 173, no. March


    DOI: 10.1016/j.vacuum.2019.109146

    Abstract anzeigen

    The intermittent He/D ion irradiations of polycrystalline W have been performed at the ion energy of 50 eV by changing the time of the single irradiations and the irradiation temperature. All irradiated W specimens have been observed by scanning electron microscopy, and the effect of intermittent He/D ion irradiations on the W fuzz growth has been analyzed. The W fuzz growth over W targets does not show the clear dependence on the intermittent He/D ion irradiations, where the He/D ion fluence of the single irradiations typically varies from 5.0 × 1024 to 2.5 × 1025/m2. However, a slight change in the W surface temperature during the single He ion irradiations significantly affects the W fuzz growth rate. Analysis indicates that W fuzz growth is significantly affected by the total He ion fluence varying from 5.0 × 1024 to 5.0 × 1025/m2 and the irradiation temperature varying from 1100 to 1450 K. This current study will play a crucial role in understanding the W fuzz growth under the periodic He/D ion irradiations of W divertor in fusion reactors, such as ELMs.

    NachhaltigF: Elektrotechnik und MedientechnikI: IQMA


    W. Ni, L. Liu, Y. Zhang, H. Fan, G. Song, D. Liu, Günther Benstetter, G. Lei

    Mass loss of pure W, W-Re alloys, and oxide dispersed W under ITER-relevant He ion irradiations

    Journal of Nuclear Materials, vol. 527


    DOI: 10.1016/j.jnucmat.2019.151800

    Abstract anzeigen

    In this study, polycrystalline W, W-Re alloys, and La2O3 and Y2O3 dispersion-strengthened W have been irradiated by our large-power materials irradiation experimental system (LP-MIES) at the irradiation temperature of 1360–1460 K. Our measurements show that the W nano-fuzz layer which is < 5.2 μm thick has been formed over all the specimens exposed to the low-energy (50 or 100 eV) and high-flux (1.37 × 1022–1.62 × 1022 ions/m2⋅s) He+ irradiations. The mass loss of the fuzz layer almost linearly increases with the He+ fluence, which does not show any dependence on the thickness of fuzz layer varying from 1.1 to 5.2 μm La2O3 and Y2O3 dispersions into W significantly suppress the growth of W fuzz, indicating that He diffusion and the evolution of He nano-bubbles in the near-surface can be significantly influenced due to the dispersion. After He+ (100 eV) irradiation at He+ fluence of 5.83 × 1026/m2, the mass loss of 0.1 vol% - 1.0 vol% La2O3-dispersed W is about 20% lower than the one of the pure W, and the La2O3 dispersed W exhibits the best erosion resistance among various W material grades. Our analysis indicates that both the surface sputtering of W fuzz by energetic ions and surface bursting of He nano-bubbles can be responsible for the mass loss of W under ITER-relevant He+ irradiations.